When you want to overhaul your air conditioner, there are so many mistakes that you may commit that may not only damage you equipment but can also cause serious injuries. That is why it is very important to be careful to ensure that everything is done correctly to prevent any loss. Most people commit these mistakes because of ignorance or simply because they do not have adequate knowledge. If you want things to be okay when you opt to overhaul your air conditioner, here are 6 mistakes that you should avoid:
1. Not switching off the aircon
This is one of the most common mistakes that most people who want to overhaul their air conditioners make. Before you do anything with your air conditioner, one of the most important things that you have to do is ensure that it is switched off. This is the only way you can prevent the risk of electric shock or injuries that can be caused when the aircon starts running unexpectedly because it is plugged into power. In fact, you should do more than just switching it off. You should ensure that it is not connected to the electricity supply terminal. This is the only way that you will be able to ensure that no electricity is getting in to the air conditioner. Remember, safety is very important when conducting aircon overhaul. You have to ensure that you and anyone else that may be around you is safe before continuing with your job. Electrocution is very serious because it is something that can even cause death.
2. Starting the job without all the necessary tools
Before you think about touching your air conditioner, you have to ensure that you have all the tools that are need to overhaul it effectively. You should not start the job when you are not fully equipped with all the tools that are needed to do the job effectively. There are so many tool that you will need to overhaul your aircon. If you are not sure which tools you need, you should list all the tasks that you want to perform so that you can write the tolls that you will need against them. This is the only way that you will be able to ensure that you don’t forget any tool that will be needed when you start the job. Checking the tools before beginning the job will also help to ensure that you borrow or buy all the tools that you don’t have in advance so that you do everything fast when you start working.
3. Not checking all parts of the aircon
When you start checking your aircon, you should not forget to check any of its parts. This is because when you don’t check everything, you can easily fail to detect some parts that are faulty or that are developing problems. In fact, the first thing that you should do is inspect all the parts of the aircon to record all the parts that are faulty or than need to be replaced. Replacing one faulty part and leaving another will only make the new part prone to damage because of the effects of the part that is not functioning as it should. Although it will be time consuming to check each individual part, it is something that you should do for your own good. However, if your time is limited, you should check the parts of the aircon that are most likely to develop problems. Sometimes, you will be surprised to find out that the sections that you don’t expected to find problems are the areas with the most problems.
4. Not dusting and cleaning the aircon
Your air conditioner should be dusted and cleaned as often as possible. If you want to overhaul it, this is your opportunity to dust and clean all areas that have always been difficult to reach. Dusting is easy because all you need to have is a blower. However, cleaning should be done carefully to ensure that you do not damage the parts of your air conditioner. In addition to care, you should use the right cleaning tools and solvent to prevent damage. There will definitely be areas that are difficult to reach unless you remove other parts. Take your time to remove everything you need to remove to reach all parts of the aircon to remove as much dirt as possible.
5. Replacing parts with the wrong ones
It is very wrong to replace any part of your aircon with a part that is not exactly the same. A wrong part may make it impossible for the aircon to work when you put it back on. If you aircon works with the wrong part, you will definitely run into a problem in the future. A wrong part can damage the whole air conditioner. Injuries can also result when you stat running an air conditioner whose parts have been replaced with the wrong ones. To be safe and to avoid all the possible problems that can arise when you replace parts of your air conditioner with the wrong ones, always check twice to ensure that your replacement part has the same specifications as the original part. You should not allow any variation. Doing replacements the right way will help you to ensure that your air conditioner serves you for a very long time to come without problems.
6. Starting the job when you are not qualified for it
If you have never overhauled an aircon before or if you have not been trained for the job, aircon overhaul is definitely something that you should not attempt to do by yourself. This is because you will not only damage your machine but you also put yourself at a great risk. The best thing to do if you are not qualified for the job is seek help from a professional. A professional knows how to overhaul an air conditioning machine and knows how to do it in the best way possible. Although you will have to part with some your money to pay the aircon expert, you will save yourself from a lot of trouble that you would have faced if you decided to do things by yourself.