How To Wash And Keep Aircon Filter Clean? It’s a well-known fact that aircon units are not cheap and require regular aircon services to keep them running efficiently. To do that, often, the filters need washing or replacement. Instead of using kitchen sponges that may become filmy, messy, and dirty, you can use washable filters.
They are usually made of soft foam that is best for washing. They are a significant investment but will pay off in the long run. They also come with a matching seal and are sold in a pack of five, so you must buy five at a time.
Table of Contents
Here are tips on how to wash and keep the aircon filter clean
1. Turn off the unit
You want to avoid dirtying a filter that is still in use. Before cleaning filters:
- Turn off the unit and open the dust compartment.
- Remove each filter, one by one, and wash them with soap and water.
- Please don’t rinse because it will damage the seal on the filters.
- You can use a dry washcloth to dry the filters.
2. Remove and clean the front cover
The front cover can be removed to clean it as well. Could you slide the body forward and then lift it off the unit? It will expose an opening where dust accumulates when the aircon is running. Could you wipe the door with a damp cloth to remove dust and dirt?
3. Clean the filter compartment
Use a vacuum cleaner with a brush attachment to clean the aircon’s dust compartment. Be careful not to touch the electric wiring or water tanks. Once everything is clean, brush off any remaining dust just in case some air ruins the unit by entering through it. To blow out any remaining dirt or dust, you may also need to use compressed air from your compressor, filtered before use.
4. Check the seals
When you remove the front cover, be sure to check the seal on all filters for damage. If one of the filters has a stretched or damaged seal, it can affect airflow into your air conditioner and cause injuries to items exposed. Replace them with new ones. Make sure they are correctly sealed before returning them to the unit.
5. Re-install filters and front cover
Once everything is clean, your aircon filters can be re-installed into their original positions in the unit. Please ensure you put the new filters in place of the old ones and not the opposite.
You may need to turn on your aircon unit and check to see if there are any aircon leaks or loose seals. If you notice any problems, could you repeat steps one through four until they are fixed? Once you do that, you should be able to use your aircon unit again without worrying about a dirty filter affecting how it works.
6. Remove the filter
There are specific steps you can take while running the aircon unit. Just use a vacuum cleaner to quickly suck up the dust that accumulates in the compartment by turning off the team. It will help ensure that air flows freely into your unit. After you’ve completed this, you can remove your filters with a vacuum cleaner and let them dry on a flat surface.
7. Wash your filter
If you want to wash your filters:
- Use warm water and mild detergent.
- Before adding any detergent, could you ensure they are completely soaked with warm water?
- Use a soft brush or sponge to wash each filter individually before rinsing them off with the water. You can let the filters dry on a flat surface after they’ve been washed and rinsed off.
- Please ensure no debris is left on the filters before putting them back into your unit because it will damage your team in the long run.
8. Re-assemble your filter
Once all the filters are clean, re-assemble them into their original positions on your aircon unit. Make sure you put the new filters in place of the old ones instead of the opposite. You may need to turn on your aircon unit and check to see if there are any leaks or loose seals. If you notice any problems, could you repeat steps one through six until it has been fixed? Once you do that, you should be able to use your aircon unit again without worrying about a dirty filter affecting how it works.
9. Check the front cover
You can remove the front cover to clean it as well. Could you slide the body forward and then lift it off the unit? It will expose an opening where dust accumulates when the aircon is running. Could you wipe the door with a damp cloth to remove dust and dirt?
10. Use compressed air to blow out any remaining dirt or dust
You may need to use compressed air from your compressor, which must be filtered before use, to blow out any remaining dirt or dust in your aircon unit’s compartment after you finish washing your filters. Be sure to check the seals on your filters for damage or damage.
11. Remove debris
To ensure that your aircon unit is running to its full potential, you must remove any dirt or dust that remains in your aircon’s interior compartment. If there is any debris left, it may cause your unit to perform poorly or, worse, not at all. You can use a vacuum cleaner with a brush attachment. After you’ve completed this, you can remove the filters with a vacuum cleaner and let them dry on a flat surface.
12. Remove dust
If dusty air comes in through your unit, your aircon must pull in the cool air more efficiently and effectively. To prevent this, use a vacuum cleaner to remove any dirt or dust that has settled inside your unit. Just use a brush attachment to brush away all the dust, dirt gently, and other deposits left on the outside of your team. Once you’ve completed this, you can remove the filters with a vacuum cleaner and let them dry on a flat surface.
How To Wash And Keep Aircon Filter Clean? – Conclusion
A clean air conditioning unit is fundamental because it can protect your home or office from natural air and weather change. Using compressed air to blow out the dust regularly will ensure that no dirt or dust is getting into your unit.
Cleaning the filters regularly will ensure that they are working correctly, removing all harmful materials inside your unit. You should just as often clean your aircon filter as you do air conditioner filters unless you want to increase the lifespan of your air conditioning unit by using it for a more extended period.