Every once in a while, the Aircon air conditioner requires some checkup and maintenance to ensure that it works as it should. While this may entail many things, it usually involves chemical cleaning as dirt is the major hindrance to proper functioning.
What is chemical cleaning for Aircon?
For Aircon air conditioners, chemical cleaning involves the use of chemicals to clean and get rid of any germs or scales which may have developed on different parts of the air conditioner. All the parts are properly cleaned one at a time and then cleansed using cleansing chemicals. The air conditioner is then put back together and re-installed. For effectiveness, the cleaning process is conducted in a procedure that ensures the entire surface is covered. Other factors such as the chemical types also have to be considered.
Here are guidelines on how to use chemical cleaning for Aircon:
Getting the proper chemicals –
There are specific chemicals used for cleaning Aircon air conditioners, and using a wrong one may lead to damages arising from negative reaction, or inefficiency. As such, it is important that you ascertain the chemical’s authenticity and quality before embarking on the cleaning process.
Dismantling the air conditioner –
For proper cleaning, the Aircon air conditioner has to be fully dismantled so as to cover the whole surface area on all the parts. This is a tricky process, especially if you are not familiar with Aircon’s structure. As such, it is important that the dismantling be conducted properly to avoid damaging certain parts. This is because damages cannot only hinder the air conditioner’s functioning; it may also cause internal accidents and malfunctioning which can cause it to destroy some of the other internal components.
When the different parts and components of the air conditioner have been properly dismantled, it comes down to the cleaning. This should be done with precision to ensure all parts are dirt free so as to completely eliminate the shortcomings associated with accumulation of dirt. Each part should be thoroughly cleaned using sufficient chemical reagents. Attention should be particularly given to parts which have cavities in them as this is where most of the dirt tends to accumulate. The air filters should also be emphasized upon as this is where the air passes through, and leaving dirt residue will expose the inhabitants to contaminated air. The drainage pipes should also be flushed using the chemicals to get rid of any bacteria and/or germs residing within.
After cleaning, all the parts should further be cleansed to get rid of any dirt residue or scales which may have formed after cleaning. To do this, the different Aircon parts are immersed in the cleansing chemical solution for some time. They are then taken out and dried.
After the cleaning, the fan and the bearing should also be lubricated to allow easy movement. This significantly increases the speed at which the fan moves, increasing its cooling capabilities and also reducing the amount of noise generated.
After the Aircon air conditioner has been thoroughly cleaned and dried, it should be re-attached just as it was before. As such, it is important to ensure that all the parts are well placed and properly screwed in place to ensure proper coordination. After successful re-installation, you should notice some changes in your Aircon air conditioner. These are just some of the benefits of chemical cleaning. However, some are not easily noticeable, but they are attained nonetheless.
Some of the benefits of chemical cleaning for Aircon include the following:
Better performance –
After chemical cleaning, Aircon air conditioner is able to cool the air better and faster. This ensures better regulation of temperatures, boosting the inhabitant’s comfort.
Less noise –
Cleaning also significantly reduces the noise produced by the air conditioner while it is running. This creates a better working and living environment as the constant noise can be distracting.
Cleaner air –
Accumulation of dirt in the air filter contaminates the air passing through, putting the people in the room at risk of respiratory complications after long exposure to the dirt particles.
Cheaper bills –
After cleaning, Aircon air conditioners have also been shown to consume lesser units of power per output as compared to when dirty. This saves users money which would have otherwise gone to paying for power bills.
Owing to the precision and skill required, the chemical cleaning process should be conducted carefully to ensure that no damage is caused to the different parts. Alternatively, you may also leave it to the experts who have the right skills, experience and equipment for the job.